Geolorn Limited

A multi-disciplined
drilling project
management company


Strategic Alliance Partners

Partner logo

Center Rock Incorporated (CRI)

CRI was founded in 1998, by Brandon Fisher and is now a “Who’s Who” of Down The Hole Hammer (DTH) drilling, from design through to management and testing regimes.

Based in Berlin, Pennsylvania, USA; CRI epitomises what customer focus is all about, listening and responding to those in the field, fine tuning existing products, or producing a completely new design, where required.

The product range is vast from Single Piston Hammers through to their multi hammer LP canister drills, offering hole diameters from 76mm (3”) through to over 3,000mm (120”), which allow clients to address most requirements for holes in rock, be it for a simple probe hole or large shaft.

In 2010, CRI’s expertise was tested to the max, when they had to supply tooling that allowed the drilling of a hole, into which a cage was lowered to rescue miners, trapped deep underground, high in the Chilean Andes. This whole project is now a thing of legend and underlines the ethos that drives CRI on a daily basis.

Because, CRI listen to the market, their Roto-Loc Casing Whilst Drilling (CWD) system, is continually evolving, combining the advantages of an under-reaming method, with the ability to manipulate the casing, reducing the risks of it becoming stuck and avoids the problem of under-reaming systems, that can become jammed, when the “wings” become wedged in the open position, preventing the bit from being withdrawn, which can laed to having to pull the entire casing string, as well all drill pipe.

Any project that requires a hole to be drilled in rock, or casing to be installed through ground too difficult to penetrate with rotary drilling methods, would benefit greatly from having CRI in their arsenal, so contact Geolorn today, to see how you and your project can be a part of this strategic partnership.

Partner logo Driconeq Pipes

Driconeq Drill Pipes (Sweden)

From their headquarters in Sunne, Sweden, Driconeq develops, produces and distributes advanced drilling equipment for mining, water well drilling, construction and mineral extraction, as well as for many other applications.

With over 35 years of experience, Driconeq has established a reliable process to provide customers all over the world with advanced drilling equipment.

Driconeq, uniquely has its own heat treatment business, HÄRDtekno AB, ensuring the highest quality whilst cutting lead-times significantly for production and delivery of drilling equipment.

Using the highest quality steel, the products they develop are used every day in nearly every part of the world and contribute to the development and improved efficiency of the drilling industry.

Geolorn have been long-time collaborators with Driconeq, providing customer focused, solution driven answers to many major drilling projects. For further information on how we can help …contact us.

Partner logo Skelair Klemm Rig

Skelair International (UK)

Skelair is the UK’s leading independent drilling equipment supplier for ground engineering and rock drilling and Geolorn has recently entered into a Joint Venture, to provide customers with a seamless, solutions based service, for optimal equipment supply. This ranges from specialist drilling rigs, through to lubricants and everything in between, backed up by service division that offers peace of mind.

Skelair stocks a wide range of drilling equipment and consumables and can arrange delivery of almost any item anywhere in the world as speedily as possible. This will help you to ensure you make the most efficient and cost effective choice for your drilling project.

The Skelair/Geolorn Joint Venture brings together a huge knowledge base and introduces their clients to the vast global network of strategically selected manufacturers and partners, that can help make any project a successful one. For more information us.

Robertson Geologging

Geolorn Ltd., are proud to be a strategic partner with Robertson Geologging, offering our clients an even greater level of project support.

Robertson Geologging are a long established UK company, based in Conwy, North Wales and provide a global service to mineral, geotechnical, water resource, geothermal and hydrocarbon companies.

With a continually evolving range of services, as well as an on-site well to test tools under operating conditions, Robertson Geologging can meet all levels of logging requirements, from basic, through to complex, working with their clients to ensure that the service is bespoke, rather than best-fit.

If your project requires logging of any type, please call us today or visit the RG Website to see how we can help maximise your investment.

N+N Drilling

N+N Drilling have been manufacturing high quality rock coring and ground sampling equipment for almost half a century.

Based in Jessup, Pennsylvania, USA in the heartland of the American industrial belt, their state of the art manufacturing facility and extensive warehouse capability, means that the highest quality equipment is shipped quickly and efficiently.

Whereas, all other major suppliers have "commoditised" in-hole equipment, N+N Drilling, still take huge pride in the equipment they manufacture and supply, knowing full well that the guy on the rig is relying on them to ensure that what he is running, is as good as it can be.

This may be an old-fashioned way of running a company, but when you consider that we are involved in the exploration and sampling of rocks and soils, millions of years old, then it probably makes sense to buy equipment from people who understand the demands of our industry, rather than people in suits staring at spreadsheets.

Geolorn are really pleased to be able to work with N+N Drilling, for all their exploration drilling projects and share this collective knowledge with their client base, as Geolorn and N+N Drilling recognise the importance of quality tooling and its role in a successful project outcome, often in remote locations.

Contact Geolorn today and understand why we believe that N+N Drilling is one of our Core Strengths.

What we do:
  • Drilling project management
  • Equipment supply chain management
  • Project support services
  • Site supervision
  • Specialist drilling personnel
  • Project audits